您好,欢迎访问苏州赛浦斯电子有限公司官网
简体中文   |   English   |   理合作   |   关于我们   |   联系我们
咨询热线
0512-66324802
产品中心
HV-KIT-ESD

HV-KIT-ESD

HANDI-VAC KIT, Static dissipative, with conductive silicone vacuum cups. (1) 1/8" and (1) 1/4" vacuum cups on bent probes and (1) 1/8" and (1) 3/8" vacuum cups on straight probes.

Our HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate:
1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the HANDI-VAC tool.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe.
2.    Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped.
3.    Move the part to where you need it and a second squeeze of the bulb releases the part.

Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against.  This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter.  Use the larger cups to pick up larger and heavier parts.   For better precision in part placement see our PEN-VAC or PEN-VAC PRO-Series self contained vacuum p

HANDI VAC套件,静电耗散,导电硅酮真空杯。(1)弯曲探针上的“1/8”和(1)1/4真空杯和(1)1/8探针和(1)3/8真空探头。


我们的赛浦斯-工具包是一个低成本的拾取和放置工具,可以进入每个人的工具箱。这些工具操作简单:

1。选择一个带有一个橡胶真空杯的小头,这个探头比你想摘下的部位略微小一些。把探针紧紧地贴在HANDI VAC工具的尖端上。确保橡胶真空尖端上没有灰尘。注意:我们更大的橡胶真空杯可以直接放置在HANDI VAC尖端,而不用探针。

2。轻轻挤压HANDI VAC气囊,将软吸盘直接放置在拾取和放置部分,然后放松您的挤压。这个部分现在被牢牢抓住了。

三。把零件移到需要的地方,气囊的第二挤压就会释放零件。


这种工具的应用包括SMT部件、金属部件、塑料部件或任何具有橡胶真空镊子尖端可以密封的平滑无孔表面的物品。该工具可用于任何大小为3/32英寸(2.38毫米)至3/4英寸(19.05mm)的橡胶真空杯。使用较大的杯子来捡起更大更重的部件。为了更好的部分放置精度,请参阅我们的PE-VAC或PN-VAC PRO系列自带真空笔。





0.00
0.00
  

HANDI-VAC KIT, Static dissipative, with conductive silicone vacuum cups. (1) 1/8" and (1) 1/4" vacuum cups on bent probes and (1) 1/8" and (1) 3/8" vacuum cups on straight probes.

Our HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate:
1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the HANDI-VAC tool.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe.
2.    Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped.
3.    Move the part to where you need it and a second squeeze of the bulb releases the part.

Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber vacuum tweezer tip can seal against.  This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter.  Use the larger cups to pick up larger and heavier parts.   For better precision in part placement see our PEN-VAC or PEN-VAC PRO-Series self contained vacuum p

HANDI VAC套件,静电耗散,导电硅酮真空杯。(1)弯曲探针上的“1/8”和(1)1/4真空杯和(1)1/8探针和(1)3/8真空探头。


我们的赛浦斯-工具包是一个低成本的拾取和放置工具,可以进入每个人的工具箱。这些工具操作简单:

1。选择一个带有一个橡胶真空杯的小头,这个探头比你想摘下的部位略微小一些。把探针紧紧地贴在HANDI VAC工具的尖端上。确保橡胶真空尖端上没有灰尘。注意:我们更大的橡胶真空杯可以直接放置在HANDI VAC尖端,而不用探针。

2。轻轻挤压HANDI VAC气囊,将软吸盘直接放置在拾取和放置部分,然后放松您的挤压。这个部分现在被牢牢抓住了。

三。把零件移到需要的地方,气囊的第二挤压就会释放零件。


这种工具的应用包括SMT部件、金属部件、塑料部件或任何具有橡胶真空镊子尖端可以密封的平滑无孔表面的物品。该工具可用于任何大小为3/32英寸(2.38毫米)至3/4英寸(19.05mm)的橡胶真空杯。使用较大的杯子来捡起更大更重的部件。为了更好的部分放置精度,请参阅我们的PE-VAC或PN-VAC PRO系列自带真空笔。