您好,欢迎访问苏州赛浦斯电子有限公司官网
简体中文   |   English   |   理合作   |   关于我们   |   联系我们
咨询热线
0512-66324802
产品中心
V8901-LMS-ESD

V8901-LMS-ESD

0.00
0.00
  

PEN-VAC, ESD safe, 5 3/4" silver body, kit with (3) bent and (3) straight probes with (2) each 1/8", 1/4", 3/8" diameter conductive silicone cups.

 

The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:
1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.
2.    Depress AND hold the button on the side of the tool.
3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.
4.    Move the part to where you want it and depress the button again.  The part is now released.
NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.
pen-vac,防静电,5 3 / 4“银色的身体,试剂盒(3)弯曲(3)直探头(2)每1 / 8“,1 / 4“,3 / 8“直径导电硅杯。

pen-vac是完全独立的。没有电池或软管堵塞。操作如下:
1。在探针上选择一个橡胶真空杯,比你要选择和放置的部分稍小一些。把探针snuggly在真空钢笔尖。确保橡胶真空尖端没有灰尘。注:我们的较大的橡胶真空杯可以直接放置在真空笔尖不使用探针。
2。按下并按住工具一侧的按钮。
三.将真空尖端直接对准零件并松开按钮。这部分现在掌握了。
4。把零件移到你想要的地方,再按下按钮。该部分现已发布。
注:此工具只适用于橡胶真空提示。气密密封需要橡胶。